LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Vibe GT >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Introduction) -- 1.8L (LNK) >> Repair Instructions >> Rocker Arm Oil Pressure Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Oil Control Solenoid Housing And Pressure Switch Removed
    GM860902Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Component Fastener Tightening Notice in Cautions and Notices.
  1. Install the rocker arm oil pressure switch (2) into the rocker arm oil control solenoid housing (1).

    Tighten:  Tighten the switch to 13 N.m (9.5 lb ft).

  2. Connect the electrical connector to the rocker arm oil pressure switch.
    3. Fig 2: PCV Hose, Breather Hose, EVAP Hose
    GM850214Courtesy of GENERAL MOTORS CORP.
  3. Connect the PCV hose (1) and the PCV breather hose (2) to the engine.
  4. Connect the EVAP hoses.
    5. Fig 3: View Of Engine Upper Cover
    GM828878Courtesy of GENERAL MOTORS CORP.
  5. Install the engine cover (1) to the engine.
  6. Secure the engine cover (1) with the four fasteners.

    Tighten:  Tighten the fasteners to 7 N.m (62 lb in).

scientia non olet · About LEMON Manuals