LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Vibe Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Lighting Systems) >> Repair Instructions >> License Lamp Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open liftgate.
  2. Remove trim panel service hole cover. Refer to Trim Panel Replacement - Liftgate .
    3. Fig 1: Disconnecting/Connecting License Lamps Electrical Connectors
    GM824519Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the license lamp electrical connector.
  4. Remove the license plate lamp bulb, turning counterclockwise.
  5. Squeeze the tabs on each side of the license plate lamp (1).
  6. Remove the license plate lamp (1) from the liftgate (2).
scientia non olet · About LEMON Manuals