LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Vibe Base, FWD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Introduction) - 1.8L (LV6) >> Repair Instructions >> Ignition Coil(s) Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Electrical Harness Package, Ignition Coils And Fasteners
    GM621679Courtesy of GENERAL MOTORS CORP.
  1. Install the ignition coils (3) to the engine.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Secure the ignition coils with the fasteners (4).

    Tighten:  Tighten the ignition coil fasteners to 9 N.m (80 lb in).

  3. Install the electrical harness (2) and secure with the 2 fasteners (1).

    Tighten:  Tighten the fasteners to 8.8 N.m (78 lb in).

  4. Connect the electrical connectors to the ignition coils (3).
    5. Fig 2: View Of Engine Top Cover, Plastic Retainers And Fasteners
    GM856569Courtesy of GENERAL MOTORS CORP.
  5. Install the engine cover (1).
  6. Secure the engine cover (1) with the 2 fasteners.

    Tighten:  Tighten the 2 fasteners to 9 N.m (80 lb in).

  7. Install the 2 plastic retainers.
scientia non olet · About LEMON Manuals