LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Vibe Base, FWD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Introduction) - 1.8L (LV6) >> Repair Instructions >> Camshaft Position (CMP) Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Engine Top Cover, Plastic Retainers And Fasteners
    GM856569Courtesy of GENERAL MOTORS CORP.
  1. Remove the 2 fasteners.
  2. Remove the 2 plastic retainers.
  3. Remove the engine cover (1) from the engine.
    4. Fig 2: CMP Sensor, Hold-Down Bolt And Electrical Connector
    GM181686Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the CMP electrical connector (3).
  5. Remove the 1 CMP sensor hold-down bolt (2).
  6. Remove the CMP sensor (1) from the cylinder head.
scientia non olet · About LEMON Manuals