LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Vibe Base, FWD, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Grounding Nuts, Bolts, And Battery Cables
    GM830260Courtesy of GENERAL MOTORS CORP.
  1. Position the negative battery cable (2) into the vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Connect the cable to the transaxle housing. Secure with the ground bolt (1).

    Tighten:  Tighten the ground bolt to 23 N.m (17 lb ft).

  3. Connect the cable to the body. Secure with the ground bolt (3).

    Tighten:  Tighten the body ground bolt to 14 N.m (124 lb in).

  4. Route the cable and secure it in the harness retainer.
  5. Install the battery tray.
  6. Install the battery. Refer to Battery Replacement .
scientia non olet · About LEMON Manuals