LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Vibe Base, FWD, Automatic >> Repair and Diagnosis >> Electrical >> Body Electrical >> Accessory Power Socket >> Repair Instructions >> Power Outlet Receptacle Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Accessory Power Receptacle Bezel Components
    GM853104Courtesy of GENERAL MOTORS CORP.
  1. Install the accessory power receptacle switch (5) to the bezel (3), by pushing in until the tabs lock in.
  2. Connect the electrical connector.
  3. Gently install the accessory power receptacle switch bezel (3) by pressing into place until the upper tabs (1) and lower tabs (4) are fully seated.
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
scientia non olet · About LEMON Manuals