LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Vibe Base, FWD, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Deceleration Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Deceleration Sensor And Bolts
    GM839809Courtesy of GENERAL MOTORS CORP.
  1. Install the deceleration sensor (2) to the vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the two bolts (1) that retain the deceleration sensor.

    Tighten:  Tighten the two deceleration sensor bolts to 21 N.m (15 lb ft).

  3. Connect the deceleration sensor electrical connector.
    4. Fig 2: Deceleration Sensor Bracket And Bolt
    GM839796Courtesy of GENERAL MOTORS CORP.
  4. Install the upper deceleration sensor bracket (2) and the bolt (1).

    Tighten:  Tighten the upper deceleration sensor bolt to 21 N.m (15 lb ft).

  5. Install the LH front seat. Refer to Seat Replacement - Front Bucket in Seats.
scientia non olet · About LEMON Manuals