LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Vibe Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Cruise Control System) >> Repair Instructions >> Cruise Control Servo Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Cruise Control Servo Cover & Tabs
    GM844775Courtesy of GENERAL MOTORS CORP.
  1. Disengage the 2 tabs (2) on the cruise control cover (1)
  2. Remove the cruise control servo cover (1).
    3. Fig 2: View Of Cruise Control Cable At Servo Lever
    GM844777Courtesy of GENERAL MOTORS CORP.
  3. Loosen the accelerator control cable locknuts (2).
  4. Remove the following components from the cruise control servo:
    • The cruise control servo cable bracket screw (5)
    • The cruise control servo cable (4)
    • The accelerator control cable (3)
    5. Fig 3: Locating Cruise Control Servo Electrical Connector
    GM844781Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the cruise control servo electrical connector (3).
  6. Remove the following components from the vehicle:
    • The 2 cruise control servo mounting bolts (2)
    • The cruise control servo (1) with the bracket attached
scientia non olet · About LEMON Manuals