LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Vibe Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Cruise Control System) >> Repair Instructions >> Cruise Control Cable Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the throttle body cam slightly.
  2. Disconnect the cruise control cable from the throttle body cam lever.
  3. Remove the cruise control cable from the throttle body bracket.
  4. Remove the cruise control cable from the retainer clip on the engine.
    Fig 1: View Of Cruise Control Cable At Throttle Body Cam Lever
    GM792955Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the cruise control cable from the cruise control module by turning the cable 1/4 turn counterclockwise.
    Fig 2: Aligning Cruise Control Cable
    GM329483Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the cruise control cable slug from the ribbon buckle.
  7. Remove the cruise control cable from the engine compartment.
    Fig 3: Disconnecting Cruise Control Cable
    GM792961Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals