LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Vibe Base, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Positive Cable Replacement >> Removal Procedure

Removal Procedure

    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
    IMPORTANT: Whenever battery cables are being replaced, always be certain to use a replacement cable that is the same type, size and length. Some positive (+) cables have additional feed wires attached to them and some negative (-) cables have additional ground leads attached. Always be certain to route the replacement battery cable in exactly the same manner as the original cable.
  1. Remove the battery from the vehicle. Refer to Battery Replacement .
  2. Remove the plastic insulator from the positive (+) battery terminal.
    3. Fig 1: Grounding Nuts, Bolts, And Battery Cables
    GM830260Courtesy of GENERAL MOTORS CORP.
  3. Remove the nut (5) from the positive (+) battery cables.
  4. Separate the positive (+) battery cable (4) from the battery positive fuse block feed cable.
  5. Remove the positive (+) battery cable harness loom from the harness retainers.
  6. Remove the positive (+) battery cable from the harness loom being careful not to damage the other wires in the harness.
  7. Disconnect the retaining nut and the cable from the starter solenoid.
  8. Remove the cable from the vehicle.
scientia non olet · About LEMON Manuals