LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Vibe Base, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Replacement >> Removal Procedure

Removal Procedure

    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
    IMPORTANT: Whenever battery cables are being replaced, always be certain to use a replacement cable that is the same type, size and length. Some positive (+) cables have additional feed wires attached to them and some negative (-) cables have additional ground leads attached. Always be certain to route the replacement battery cable in exactly the same manner as the original cable.
  1. Remove the battery. Refer to Battery Replacement .
  2. Remove the battery tray.
    3. Fig 1: Grounding Nuts, Bolts, And Battery Cables
    GM830260Courtesy of GENERAL MOTORS CORP.
  3. Remove the ground bolt (3) and the negative battery cable from the body.
  4. Remove the ground bolt (1) and the negative battery cable from the transaxle housing.
  5. Remove the cable (2) from the harness retainers and remove the cable from the vehicle.
scientia non olet · About LEMON Manuals