LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Vibe Base, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Disconnect/Connect Procedure >> Installation Procedure

Installation Procedure

  1. Verify that all electrical components are off such as interior lights, all doors are closed, the underhood lamp, etc.
  2. Clean corrosion from the negative battery cable using a metal brush.
    3. Fig 1: Battery, (-) Cable, (+) Cable, Bracket And Bolt
    GM830275Courtesy of GENERAL MOTORS CORP.
  3. Install the battery negative cable (3) to the battery (5).
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the retaining bolt to the battery negative cable.

    Tighten:  Tighten the battery negative cable to 15 N.m (11 lb ft).

  5. Reset the radio stations and the clock.
scientia non olet · About LEMON Manuals