Installation Procedure
IMPORTANT:
Do not tip the battery more than 40 degrees during battery installation.
- Install the battery to the battery tray.
NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
- Install the battery hold down retainer and bolt.
Tighten: Tighten the battery hold down retainer bolt to 18 N.m (13 lb ft).
- Connect the positive battery cable bolt.
Tighten: Tighten the battery positive cable terminal bolt to 15 N.m (11 lb ft).
- Connect the negative battery cable bolt. Refer to Battery Negative Cable Disconnect/Connect Procedure .