Installation Procedure

Install the optional power mirror switch. Refer to Power Window Switch Replacement .
If the vehicle is equipped with a manual rear view mirror, slide the panel over the mirror handle.
Position the upper trim finish panel to the inner door.

Fig 1: Aligning Upper Trim Finish Panel

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Fig 2: Installing Upper Trim Panel Screw

Courtesy of GENERAL MOTORS CORP.

Install the upper trim panel screw.
Tighten: Tighten the screw to 1.3 N.m (12 lb in).