Removal Procedure
IMPORTANT:
When replacing battery cables be sure to use replacement cables that are the same type, gauge and length.
- Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
- Loosen the positive battery terminal nut.
- Remove the positive battery terminal (1) from the battery.
- Remove the ground wire bolt (3) and the wire (4) from the frame.
- Remove the positive battery cable junction block lead nut (1).
- Remove the positive battery cable (2) from the bussed electrical center (BEC).
- Remove the BEC (3) from the strut tower.
- Unclip and remove the positive battery cable harness from the BEC.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Remove the front lower air deflector. Refer to Radiator Air Baffle and Deflector Replacement - Lower in Engine Cooling.
- Remove the positive battery cable nut (2) from the starter.
- Remove the positive battery cable (3) from the starter motor BAT terminal.
- Remove the transaxle stud nut (5).
- Remove the engine ground cable (6) from the transaxle stud.
- Unclip and remove the battery cable harness from the retainers.
- Remove the battery cable harness from the vehicle.
- Remove the negative battery cable from the wiring harness conduit.