Installation Procedure

NOTE: Refer to Fastener Notice in Cautions and Notices.

IMPORTANT: Clean any existing oxidation from the contact face of the battery terminal and battery cable using a wire brush before installing the battery cable to the battery terminal.

Install the negative battery terminal (2) to the battery.
Tighten: Tighten the negative battery terminal nut to 15 N.m (11 lb ft).

Fig 1: Identifying Battery Terminals & Ground Wire

Courtesy of GENERAL MOTORS CORP.

Set the clock and program the radio stations back into the radio as recorded at the beginning of the procedure. Refer to Radio/Audio System Description and Operation in Entertainment.