BPP Sensor Calibration
IMPORTANT:
If the BCM, electronic brake control module (EBCM) or the brake apply sensor (BAS) is replaced a brake pedal position (BPP) sensor calibration must be preformed.
Perform the BPP Sensor Calibration using a scan tool if the BCM, EBCM or the brake apply sensing system (BASS) sensor has been replaced.
Using a scan tool preform the following:
- Navigate to Body.
- Navigate to the Body Control Module menu.
- Enter Special Functions.
- Select BPP Sensor Calibration.
- Follow the on-screen directions.