Removal Procedure
- Remove the battery. Refer to Battery Replacement .
- Remove the positive cable from the fuseblock:
- Open the positive cable cap.
- Remove the positive cable nut at the fuseblock.
- Remove the positive cable from the stud.
- Remove the positive cable cover from the cable.
- Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle
in General Information.
Courtesy of GENERAL MOTORS CORP.
- Remove the positive cable from the generator:
- Slide the boot back along the cable.
- Remove the positive cable nut at the generator.
- Remove the positive cable from the stud.
Courtesy of GENERAL MOTORS CORP.
- Remove the positive cable from the starter solenoid:
- Remove the positive cable nut (3) at the starter solenoid.
- Remove the positive cable from the harness conduit.