LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> GTO Standard >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Switch Replacement - Power >> Installation Procedure

Installation Procedure

  1. Position the seat adjustment switch to the seat cushion outer trim panel.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: View Of Seat Adjustment Switch Retaining Screws
    GM1366058Courtesy of GENERAL MOTORS CORP.
  2. Install three seat adjustment switch retaining screws (1).

    Tighten:  Tighten the seat adjustment switch retaining screws to 2 N.m (18 lb in).

    3. Fig 2: View Of Adjustment Knobs & Front Seat Adjustment Switch
    GM1366057Courtesy of GENERAL MOTORS CORP.
  3. Install two adjustment knobs (1) to the front seat adjustment switch (2).
  4. Install the front seat outer trim panel. Refer to Seat Cushion Outer Trim Panel Replacement .
scientia non olet · About LEMON Manuals