LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> GTO Standard >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Back Replacement - Front >> Installation Procedure

Installation Procedure

  1. Position the seat back to the seat cushion.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install 2 seat cushion frame-to-seat back frame mounting bolts (1) on each side of the seat cushion.

    Tighten:  Tighten the seat cushion frame-to-seat back frame mounting bolts to 37.5 N.m (28 lb ft).

  3. Install seat back hinge cover. Refer to Seat Back Hinge Cover Replacement - Front .
  4. Install the front seat. Refer to Seat Replacement - Front Bucket .
  5. Install the front seat outer trim panel. Refer to Seat Cushion Outer Trim Panel Replacement .
    6. Fig 1: View Of Front Seat Cushion Mounting Bolts
    GM1361394Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals