LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> GTO Standard >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Lumbar Support Knob Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Lumbar Support Deflector Ring, Retaining Screw & Cap
    GM1365013Courtesy of GENERAL MOTORS CORP.
  1. Install the lumbar support deflector ring (1), then install the lumbar support knob to the lumbar support shaft.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the lumbar support knob retaining screw (2).

    Tighten:  Tighten the lumbar support knob retaining screw to 3.5 N.m (31 lb in).

  3. Install the retaining screw cap (3) to the lumbar support knob.
scientia non olet · About LEMON Manuals