LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> GTO Standard >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Front Seat Back Position Switch Housing Assembly >> Installation Procedure

Installation Procedure

  1. Rotate "U" shaped cam (2) on the micro switch housing to the up position.
  2. Insert the micro switch (1) into the housing, then press until the securing hooks snap into place.
  3. Route the switch electrical wires harness through the hook in the housing.
  4. Position the micro switch housing to the seat frame then install two micro switch housing to the seat frame retaining screws.
  5. Install the front seat back cover. Refer to Seat Back Cover and Pad Replacement - Front .
    6. Fig 1: View Of "U" Shaped Cam & Micro Switch
    GM1592314Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals