LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> GTO Standard >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Repair Instructions >> Cruise Release Switch Replacement >> Installation Procedure

Installation Procedure

  1. If removed, install the tubular clip into the mounting hole of the break pedal support (3), then adjust the release switch. Refer to Cruise Release Switch Adjustment .
  2. Connect the cruise control release switch electrical connector (1).
  3. Install the instrument panel lower trim retainer. Refer to Instrument Panel (I/P) Retainer Replacement .
    4. Fig 1: View Of Cruise Release Switch Electrical Connector, Clip & Brake Pedal Support
    GM1377343Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals