LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> GTO Standard >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Repair Instructions >> Cruise Control Cable Replacement >> Removal Procedure

Removal Procedure

  1. Remove the cover (1) from the throttle relaxer (2) by pressing the tabs (3) on both sides of the cover.
    2. Fig 1: View Of Throttle Relaxer, Cover & Tabs
    GM1374927Courtesy of GENERAL MOTORS CORP.
  2. Rotate the top cam (4) of the throttle relaxer (5) and remove the ferrule (2) of the cruise control inner cable from the locating slot (3) in the throttle cam.
  3. Lever out the remaining tang of the outer cable (1) then lift the cable away from the throttle relaxer mounting bracket (6).
    4. Fig 2: View Of Top Cam, Throttle Relaxer, Bracket Ferrule, Locating Slot & Outer Cable
    GM1374929Courtesy of GENERAL MOTORS CORP.
  4. Turn the outer control cable (2) towards the engine approximately 45 degrees (a) to release the cable lock mechanism (3) from the cruise control module (1).
    5. Fig 3: View Of Outer Control Cable & Cable Lock Mechanism
    GM1374933Courtesy of GENERAL MOTORS CORP.
  5. Pull the outer cable (2) from the cruise control module (4) and disconnect the inner cable (3) from the electric stepper motor strap and fitting (1) by lifting the cable upward, approximately 45 degrees, allowing it to be released from the end fitting.
  6. Remove the cruise control cable.
    7. Fig 4: View Of Outer Cable, Cruise Control Module, Inner Cable & Fitting
    GM1374987Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals