LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> GTO Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls -- 5.7L -- (Introduction) >> Repair Instructions >> Mass Air Flow (MAF) Sensor Replacement >> Installation Procedure

Installation Procedure

IMPORTANT: The embossed arrows on the MAF sensor indicate the proper air flow direction. The arrows must point toward the engine.
    Fig 1: Locating MAF & IAT Sensors
    GM1372118Courtesy of GENERAL MOTORS CORP.
  1. Install the MAF sensor (2) into the air duct adaptor.
  2. Install the retaining clamps, aligning notches, tighten clamps to the specified torque.

    Tighten:  Tighten the retaining clamps to 2 N.m (17 lb in).

  3. Connect the MAF sensor (2) wiring harness connector.
  4. Connect the IAT sensor (3) wiring harness connector.
scientia non olet · About LEMON Manuals