LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> GTO Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Repair Instructions >> Cruise Control Module Replacement >> Removal Procedure

Removal Procedure

  1. Remove the cruise control cable. Refer to Cruise Control Cable Replacement .
  2. Pull the tang on the wiring harness connector (3), then pull the connector from the cruise control module (1).
  3. Remove the 3 cruise control module retaining screws (2).
  4. Remove the cruise control module from the mounting bracket (4).
    5. Fig 1: View Of Wiring Harness Connector, Cruise Control Module, Bracket & Screws
    GM1375223Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals