LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Bonneville SLE >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Body Control System >> Repair Instructions >> Instrument Panel Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Locating Instrument Panel Module
    GM428511Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connectors to the IPM (1).
  2. Install the IPM (1) to the IP retainer by inserting the top tab of the module into the slot on the IP retainer and rotating down.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the fastener.

    Tighten:  Tighten the fastener to 2 N.m (18 lb in).

  4. Install the left sound insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages and Console.
  5. Reprogram the IPM. Refer to Body Control Module (BCM) Programming/RPO Configuration (IPM)  or Body Control Module (BCM) Programming/RPO Configuration (DIM)  or Body Control Module (BCM) Programming/RPO Configuration (RIM) .
scientia non olet · About LEMON Manuals