LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Bonneville GXP >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control System >> Repair Instructions >> Rear Integration Module Replacement >> Removal Procedure

Removal Procedure

  1. Before replacing the RIM, record the personalization settings to transfer to the new module (if they are available). Refer to Body Control Module (BCM) Programming/RPO Configuration (IPM)  or Body Control Module (BCM) Programming/RPO Configuration (DIM)  or Body Control Module (BCM) Programming/RPO Configuration (RIM) .
  2. Remove the rear seat cushion. Refer to Seat Cushion Replacement - Rear .
  3. Remove the rear seat belt buckle anchor bolts.
  4. Remove the rear seat back. Refer to Seat Back Replacement - Rear .
  5. Move the rear seat back insulator to the side.
    6. Fig 1: Locating Rear Integration Module
    GM492570Courtesy of GENERAL MOTORS CORP.
  6. Remove the push pin retainers (1).
  7. Disconnect the electrical connectors (3).
  8. Remove the Rear Integration Module (RIM) (2) from the vehicle.
scientia non olet · About LEMON Manuals