Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Install the seat back to the seat adjuster.

Fig 1: Locating Seat Back Recliner Arm Bolts

GM752837

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the seat back to the seat back recliner arm with the 2 bolts.
Tighten: Tighten the bolts for the seat back recliner arm to 55 N.m (41 lb ft).

Fig 2: Locating Seat Back Pivot Bolt

GM752830

Courtesy of GENERAL MOTORS CORP.

Install the seat back pivot bolt.
Tighten: Tighten the seat back pivot bolt to 35 N.m (26 lb ft).

Fig 3: Removing/Installing Seat Cover

GM752842

Courtesy of GENERAL MOTORS CORP.

Pull the seat back cover down over the seat back pad.
Attach the hook and loop retaining strips by running your hand over the seat cover.

Fig 4: Identifying J Strips

GM752846

Courtesy of GENERAL MOTORS CORP.

Fasten the J-strips (1,4) across the bottom of the seat back cover.
Install the seat cover flaps (2) to the seat frame with pushpins (3).

Fig 5: Removing/Installing Seat Belt Anchor Nut

GM752863

Courtesy of GENERAL MOTORS CORP.

Install the seat belt anchor.
Tighten: Tighten the seat belt anchor nut to 55 N.m (41 lb ft).
Install the seat cushion trim panel. Refer to Seat Cushion Outer Trim Panel Replacement .
Install the front bucket seat assembly to the vehicle. Refer to Seat Replacement - Front Bucket .