Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Seat Back Panel - Front

Courtesy of GENERAL MOTORS CORP.

Install the seat back over the top of the seat-back frame.

Fig 2: Locating Front Seat Back Panel Side Push Pins

Courtesy of GENERAL MOTORS CORP.

Install the panel to the seat-back frame with 2 push-pin fasteners (1) to each side of the panel.

Fig 3: Locating Front Seat Back Panel Bottom Push Pin

Courtesy of GENERAL MOTORS CORP.

Install the push-pin fastener (1) to the bottom of the panel.

Fig 4: Locating Lumbar Cables At Front Seat Back Panel Clips

Courtesy of GENERAL MOTORS CORP.

Install the lumbar cables to the panel clips.
Install the front seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Front .
Install the front bucket seat assembly to the vehicle. Refer to Seat Replacement - Front Bucket .