Installation Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the electrical connector to the ashtray.
- Install the IP ashtray bracket to the instrument panel.
- Install the IP ashtray bracket screws (1).
Tighten: Tighten the screws to 2 N.m (18 lb in).
- Install the IP ashtray.
- Install the IP cluster trim plate. Refer to Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Impala) or Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Monte Carlo) .
NOTE:
Refer to Fastener Notice in Cautions and Notices.