LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (Entertainment System) >> Repair Instructions >> Receiver Replacement - Digital Radio >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: Do NOT swap digital radio receivers between vehicles. Swapping digital receivers between vehicles will activate the digital radio Theftlock®, and "XM Theftlock®" will display.
  1. Lower the right closeout insulator panel. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gages and Console.
    2. Fig 1: Module Mounting View
    GM1237407Courtesy of GENERAL MOTORS CORP.
  2. Remove the electrical connector (1) from the receiver.
    3. Fig 2: View Of Connector
    GM1237408Courtesy of GENERAL MOTORS CORP.
  3. Remove the antenna electrical connector (1) from the receiver.
    4. Fig 3: Module Mounting View
    GM1236121Courtesy of GENERAL MOTORS CORP.
  4. Remove the nuts retaining the receiver to the insulator panel.
  5. Remove the receiver from the vehicle.
scientia non olet · About LEMON Manuals