Installation Procedure

Install the front seat to the studs on the floor pan.
Connect the seat electrical connectors.

Fig 1: Identifying Front Seat Adjuster Nuts
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the nuts to the seat floor pan studs.
Tighten: Tighten the front bucket seat adjuster-to-floor pan nuts to 50 N.m (37 lb ft).

Inspect the front bucket seat for proper operation and adjustment.
Enable the SIR system. Refer to SIR Disabling and Enabling Zone 7 or SIR Disabling and Enabling Zone 9 .