LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, FWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Back Replacement - Front >> Installation Procedure

Installation Procedure

    Fig 1: View Of Seat Cushion & Seat Back
    GM627127Courtesy of GENERAL MOTORS CORP.
  1. Install the front seat back onto the front seat cushion.
  2. Install the wiring harnesses to the heated seat and to the side air bag through the front seat cushion and frame area.
  3. Install the back to the seat cushion frame.
    4. Fig 2: View Of Seat Back Recliner Hinge Left Front Bolts
    GM627009Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the left front bolts to the seat back recliner hinge.

    Tighten:  Tighten the bolts to 40 N.m (30 lb ft).

    5. Fig 3: Locating Seat Back Recliner Hinge Right Front Bolts
    GM627114Courtesy of GENERAL MOTORS CORP.
  5. Install the right front bolts to the seat back recliner hinge.

    Tighten:  Tighten the bolts to 40 N.m (30 lb ft).

    6. Fig 4: View Of Cable Ends & Seat Back Recliner Hinge
    GM627012Courtesy of GENERAL MOTORS CORP.
  6. Install the recliner cable ends to the seat back recliner hinge.
  7. Install the outer trim panel to the front seat cushion. Refer to Seat Cushion Outer Trim Panel Replacement - Front Seat .
  8. Install the inner trim panel to the front seat cushion. Refer to Seat Cushion Inner Trim Panel Replacement - Front .
  9. Inspect the seat back for proper operation.
  10. Install the front bucket seat. Refer to Seat Replacement - Bucket .
scientia non olet · About LEMON Manuals