LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, FWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Armrest Replacement - Front Seat >> Installation Procedure

Installation Procedure

    Fig 1: Aligning Front Bucket Seat Armrest
    GM626885Courtesy of GENERAL MOTORS CORP.
  1. Position the bolt into the mounting point of the armrest.
    2. Fig 2: Locating Front Bucket Seat Armrest Bolt
    GM626879Courtesy of GENERAL MOTORS CORP.
  2. Position the armrest to the front bucker seat.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Tighten the armrest mounting bolt.

    Tighten:  Tighten the armrest mounting bolt to 4.5 N.m (40 lb in).

    4. IMPORTANT: Rotate the armrest bolt trim cap to a new position to allow the retainer on the cap to seat properly.
    Fig 3: Identifying Armrest Bolt Trim Cap
    GM626875Courtesy of GENERAL MOTORS CORP.
  4. install the armrest bolt trim cap pressing into place until fully seated.
  5. Inspect the armrest for proper movement.
scientia non olet · About LEMON Manuals