Installation Procedure

Install the upper liftgate trim panel to the liftgate by pressing down until fully seated.

Fig 1: Identifying Upper Liftgate Trim Panel (Aztek)
Courtesy of GENERAL MOTORS CORP.
Position the defogger harness to the cutout in the upper trim panel.
Install the right and the left side upper trim panel by pressing in until seated.
Install the lower trim panels. Press down on the panels until fully seated.

Fig 2: View Of Lower Liftgate Trim Panel (Aztek)
Courtesy of GENERAL MOTORS CORP.
Install the right and left sides of the lower trim panels, pressing in until fully seated.
Close the liftgate.