LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> Support Cable Replacement - Endgate >> Removal Procedure

Removal Procedure

  1. Open the endgate.
  2. Support the endgate in the open position.
  3. Remove the bolts from the endgate support cable.
  4. Remove the endgate support cable from the endgate.
    5. Fig 1: View Of Endgate Support Cable
    GM621898Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals