LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> Strut Replacement - Endgate >> Installation Procedure

Installation Procedure

  1. Position the assist rods to the endgate.
    Fig 1: Assist Rod View
    GM625163Courtesy of GENERAL MOTORS CORP.
  2. Install the upper end of the assist rods to the ball joint. Press in to place until fully seated.
    Fig 2: Locating Upper End Of Assist Rods
    GM625166Courtesy of GENERAL MOTORS CORP.
  3. Install the lower end of the assist rods to the ball joint. Press in to until fully seated.
    4. Fig 3: Locating Lower End Of Assist Rods
    GM625164Courtesy of GENERAL MOTORS CORP.
  4. Close the endgate.
scientia non olet · About LEMON Manuals