LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> Pullstrap Replacement - Liftgate >> Installation Procedure

Installation Procedure

  1. Install the pullstrap to the lift gate.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the screws to the pullstrap.

    Tighten:  Tighten the pullstrap screws to 1.9 N.m (17 lb in).

    Fig 1: View Of Pullstrap Retaining Screws
    GM855498Courtesy of GENERAL MOTORS CORP.
  3. Close the lift gate.
scientia non olet · About LEMON Manuals