LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> Latch Replacement - Liftgate (Aztek) >> Removal Procedure

Removal Procedure

  1. Open the endgate.
  2. Remove the endgate trim panel. Refer to Trim Panel Replacement - Endgate .
  3. Disconnect the electrical connectors from the liftgate latches.
    Fig 1: Locating Liftgate Latch Electrical Connectors (Aztek)
    GM621901Courtesy of GENERAL MOTORS CORP.
  4. Remove the bolts from the liftgate latches.
    Fig 2: View Of Liftgate Latch Bolts (Aztek)
    GM621876Courtesy of GENERAL MOTORS CORP.
  5. Remove the liftgate latches from the endgate.
    Fig 3: Identifying Liftgate Latches (Aztek)
    GM621877Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals