LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> Latch Replacement - Liftgate (Aztek) >> Installation Procedure

Installation Procedure

IMPORTANT: Make sure the child safety lock feature is not engaged before installing the liftgate latches.
  1. Install the liftgate latches to the endgate.
    Fig 1: Identifying Liftgate Latches (Aztek)
    GM621877Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolts to the liftgate latches.

    Tighten:  Tighten the liftgate latch bolts to 10 N.m (89 lb in).

    Fig 2: View Of Liftgate Latch Bolts (Aztek)
    GM621876Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connectors to the liftgate latches.
    4. Fig 3: Locating Liftgate Latch Electrical Connectors (Aztek)
    GM621901Courtesy of GENERAL MOTORS CORP.
  4. Install the endgate trim panel. Refer to Trim Panel Replacement - Endgate .
  5. Close the endgate.
scientia non olet · About LEMON Manuals