LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> Hinge Replacement - Liftgate (Aztek) >> Installation Procedure

Installation Procedure

  1. Position the liftgate hinges with the shims and seals to the location marks on vehicle.
    Fig 1: Identifying Liftgate Hinge Shims & Seals (Aztek)
    GM743284Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the nuts to the liftgate hinges.

    Tighten:  Tighten the liftgate hinge nuts to 33 N.m (28 lb ft).

  3. Install the liftgate. Refer to Liftgate Replacement (Rendezvous) .
scientia non olet · About LEMON Manuals