Installation Procedure

IMPORTANT: The hood latch release cable must be connected to the hood latch support bracket.

Install the hood latch release cable to the hood latch.

Fig 1: Locating Hood Latch Release Cable
Courtesy of GENERAL MOTORS CORP.
Align the hood latch to the marks on the hood latch support bracket.
NOTE: Refer to Fastener Notice in Cautions and Notices.
Install the nuts to the hood latch.
Tighten: Tighten the hood latch nuts to 6 N.m (53 lb in).

Fig 2: Identifying Hood Latch Retaining Nuts
Courtesy of GENERAL MOTORS CORP.
Adjust the hood, if required. Refer to Hood Adjustment .
Close the hood.