LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Repair Instructions >> Wiper Motor Cover Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Locating Wiper Motor Cover Screws
    GM512036Courtesy of GENERAL MOTORS CORP.
  1. Position the wiper motor cover to the wiper motor.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the wiper motor cover screws.

    Tighten:  Tighten the screws to 3 N.m (27 lb in).

  3. Install the wiper system drive module. Refer to Wiper Motor Module Replacement .
scientia non olet · About LEMON Manuals