LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> Steering >> Steering Wheel & Steering Column >> Repair Instructions >> Wire Harness Assembly Replacement >> Removal Procedure

Removal Procedure

    NOTE: The wheels of the vehicle must be straight ahead and the steering column in the LOCK position before disconnecting the steering column or intermediate shaft from the steering gear. Failure to do so will cause the SIR coil assembly to become uncentered, which may cause damage to the coil assembly.
  1. Remove the steering column. Refer to Steering Column Replacement .
  2. Disconnect all the electrical connectors.
    3. Fig 1: View Of Wiring Harness In Steering Column Harness Strap
    GM322946Courtesy of GENERAL MOTORS CORP.
  3. Remove all the wire harness straps (2).
  4. Remove the wire harness from the steering column.
scientia non olet · About LEMON Manuals