Removal Procedure
- Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3
in SIR.
- Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement .
Courtesy of GENERAL MOTORS CORP.
- Pull the theft deterrent control module (2) away from the lock cylinder housing (1).
Courtesy of GENERAL MOTORS CORP.
- Depress the 2 white spring loaded retainers on the ignition switch.
- Slide the ignition switch downward away from the ignition lock cylinder case.
- Disconnect the electrical connector from the ignition switch.