LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> Steering >> Steering Wheel & Steering Column >> Repair Instructions >> Ignition Switch Replacement >> Installation Procedure

Installation Procedure

  1. Connect the electrical connector to the ignition switch.
    2. Fig 1: View of Ignition Cylinder Lock, Ignition Lock Cylinder Case Assembly and Upper Steering Column
    GM375309Courtesy of GENERAL MOTORS CORP.
  2. Slide the ignition switch into the ignition lock cylinder case.
    3. Fig 2: Locating Theft Deterrent Control Module
    GM860152Courtesy of GENERAL MOTORS CORP.
  3. Push the theft deterrent module (2), onto the lock cylinder housing (1).
  4. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement .
  5. Enable the SIR System. Refer to SIR Disabling and Enabling Zone 3 in SIR.
scientia non olet · About LEMON Manuals