LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (Lighting Systems) >> Repair Instructions >> Fog Lamp Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE in General Information.
  2. Remove the front fascia lower close out panel. Refer to CLOSE OUT PANEL - FRONT BUMPER FASCIA LOWER in Bumpers.
  3. Release the brake caliper cooling duct from the front fascia and position the duct aside.
    Fig 1: Releasing Brake Caliper Cooling Duct From Front Fascia
    G01453339Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the front fog lamp electrical connector from the fog lamp bulb/socket.
    Fig 2: Disconnecting Front Fog Lamp Electrical Connector
    G01453340Courtesy of GENERAL MOTORS CORP.
  5. Remove the front fog lamp mounting bolt from the front bumper impact bar.
  6. Remove the fog lamp from the vehicle.
    Fig 3: Front Fog Lamp Mounting Bolt
    G01453341Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals