Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.

Install the fuel filler pipe.

Fig 1: Fuel Filler Pipe

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the fuel filler pipe screw to the under body.
Tighten: Tighten the screw to 13 N.m (115 lb in).
Install the filler hose (4) to the fuel fill pipe (2).
Inspect and ensure the filler hose (4) is fully seated on the fuel tank port and the fuel filler pipe (2).

Fig 2: Identifying Fuel Tank Components

Courtesy of GENERAL MOTORS CORP.

Ensure the clamp (1) is properly located on the tank port between the bead (5) and the pipe (3).
Tighten: Tighten the fuel tank filler hose clamp to 2.5 N.m (22 lb in).
Lower the vehicle.
Install the fuel filler pipe screws to the fuel filler pipe access panel.
Tighten: Tighten the screws to 2.5 N.m (22 lb in).

Fig 3: Fuel Filler Pipe Screws

Courtesy of GENERAL MOTORS CORP.

Add fuel and install the fuel fill cap.