LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 267 (Seat System) >> Repair Instructions >> Seat Back Frame Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Lumbar Clips & Front Seat Frame
    GM865011Courtesy of GENERAL MOTORS CORP.
  1. If equipped, position the lumbar on the seat frame. Install the lumbar clips to the seat frame.
  2. Install the seat back pad. Refer to Seat Back Pad Replacement - Front .
  3. Install the seat back frame to the seat adjuster.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the bolts that secure the frame to the adjuster,

    Tighten:  Tighten the bolts to 24 N.m (18 lb ft).

    5. Fig 2: Front Seat Back Frame Bolts
    GM865006Courtesy of GENERAL MOTORS CORP.
  5. Install the seat pan bolts.

    Tighten:  Tighten the bolts to 24 N.m (18 lb ft).

    6. Fig 3: Front Seat Pan Bolts
    GM865020Courtesy of GENERAL MOTORS CORP.
  6. Install the seat cushion trim and pad. Refer to Seat Cushion Cover Replacement - Front .
  7. Install the seat trim panel. Refer to Trim Panel Replacement - Front Seat .
  8. Install the front seat. Refer to Seat Replacement - Front Bucket .
    9. Fig 4: Rear Cushion Cover (Front Seat)
    GM865021Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals